Longfield Studless Hub (Toyota)

Regular price $626.00

Shipping calculated at checkout.

Longfield Studless Hubs

A new, innovative, never before seen product, our Longfield™ Studless Hubs set the bar in quality and performance. The Longfield™ Studless Hub replaces the weaker, prone-to-breaking locking hubs, hub gears, and hub studs by utilizing a stud-less hub design and inner locking puck. Chances are, if you were to break the studs in your hub, the threads would be damaged and the hub would need to be replaced. With the Longfield™ Studless Hubs, you will never again need to worry about your hubs, hub gears, and hub studs breaking on the trail.

The Longfield™ Studless Hub and Inner Locking Puck are both constructed out of chromoly steel for superior strength and quality. The Longfield™ Studless Hubs are stronger than the OEM locking hubs and are designed to handle even higher torque loads than our Creeper Drive Flanges. The Longfield™ Studless Hubs will also include a full set of front wheel bearings to replace your old, worn out bearings.

We are so confident with the quality and strength of our new, innovative Longfield™ Studless Hubs, we are offering it with our legendary, no-questions asked lifetime warranty.

Note: On 1979-1981 Toyota Pickups, you will need the following additional parts:

  • IFS Vented Rotors (part #140332-1-KIT)
  • IFS Calipers (part #140444-1-KIT & 140445-1-KIT)
  • IFS Caliper Brake Pads (part #140091-1-KIT)
  • Front Wheel Studs (part #140392-1-KIT)

 

Note: These will lock your front axle into 4WD. To unlock your front axle, you will need to remove the locking puck.

Specifications

 

  • Stud-less hub design and inner locking puck
  • Studless Hub and Inner Locking Puck are both constructed out of chromoly steel
  • Stronger than the OEM locking hubs and are designed to handle even higher torque loads than our Creeper Drive Flanges

Note: If you are replacing 1979-1981 Toyota Pickup hub bodies, you will need the following additional parts:

  • FJ60 Vented Rotors (part #140332-1-KIT)
  • Brake Calipers (part #140444-1-KIT & 140445-1-KIT)
  • Brake Pads (part #140091-1-KIT)
  • Front Wheel Studs (part #140392-1-KIT) (if needed)

Note: These will lock your front axle into 4WD.

Application Data

 

  • 1979-1985 Toyota Pickup, 4WD with Solid Axle
  • 1985 Toyota 4Runner, 4WD with Solid Axle
  • Rock Assault Front Axle Housing

Note: On 1979-1981 Toyota Pickups, you will need the following additional parts:

  • IFS Vented Rotors (part #140332-1-KIT)
  • IFS Calipers (part #140444-1-KIT & 140445-1-KIT)
  • IFS Caliper Brake Pads (part #140091-1-KIT)
  • Front Wheel Studs (part #140392-1-KIT)

Warranty

 

All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.

Please read and review our return and warranty requirement document before sending in products.