Spindle Gussets

Regular price $59.00

Shipping calculated at checkout.
  • Weld-On Install
  • Sold as a pair.
  • See notes below for wheel specs.

Our Spindle Gussets will reinforce the upright section of the weak factory spindle and help prevent bending or breaking out on the trail. If you wheel your FJ Cruiser, 05+ Tacoma, or 03+ 4Runner hard, you need these gussets. Although other manufacturers sell similar gussets, the exclusive All-Pro design is the only one that allows you to retain your factory sway bar for safe handling on the road. Welding is required for installation. Compatible with wheels up to 4.75″ backspacing only, more than that, wheel spacers are required. Don’t get stuck out on the trail with a damaged spindle! 

Toyota Vehicles Factory Wheel Specs (1995-2014)


2005-2014 Toyota Tacoma 6-Lug Model – 2wd & 4wd
Factory 17×7.50 Wheel Offset = +30.00 mm – Back Space = 5.50″ Inches
Factory TRD Sport Alloy 17×7.50 Wheel Offset = +30 mm – Back Space = 5.50″ Inches
Factory TRD Off-Road 16×7.00 Wheel Offset = +32 mm – Back Space = 5.25″ Inches

1995.5-2004 Toyota Tacoma 6-Lug Model – 2wd & 4wd
Factory 16×8.0 Wheel Offset = +1.00 mm – Back Space = 4.54″ Inches

1999-2006 Toyota Tundra – 2wd & 4wd
Factory 16×7.0 Wheel Offset = +15.00 mm – Back Space = 4.50″ Inches
Factory 17×7.5 Wheel Offset = +18.00 mm – Back Space = 5.00″ Inches
Lug Pattern is 6 x 139mm
Hub Bore Diameter = 106mm

2007+ Toyota Tundra – 2wd & 4wd
Factory 17×8.0 Wheel Offset = +50 mm – Back Space = 6.50″ Inches
Factory 18×8.0 Wheel Offset = +60 mm – Back Space = 6.85″ Inches
Factory 20×8.0 Wheel Offset = +60 mm – Back Space = 6.85″ Inches
Lug Pattern is 5 x 150mm
Hub Bore Diameter = 110mm

 WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov